Thermosyphon System

LEAK SOLVE Thermosyphon System basically used as a storage & pressuring unit. Thermosyphon used for double mechanical seals in back to back or tandem seal arrangements. Thermosyphon provide necessary lubrication and cooling to the seal faces to increases the life of the seal. It contains cooling coil to bring down the temperature of barrier ﬂuid coming from seal to thermosyphon.

PDF Data Sheet Product Enquiry

• Thermosyphon shell: Carbon Steel, SS 304, SS 316
• Cooling coil: SS 304, SS 316, Copper
• Empty weight: 25 kg (approx) for 7.5 liters
• Secondary seal: Elastomer

• Pressure gauge: To measure the pressure inside vessel (0-10, 0-25, 0-40 kg/cm2)
• Level gauge: To indicate the liquid level inside the vessel
• Hand pump: To recharge the thermosyphon vessel with additional barrier fluid when under pressure and liquid level is low

• Cooling water inlet: 1/2" NPT (F)
• Cooling water outlet: 1/2" NPT (F)
• Buffer fluid inlet: 1/2" NPT (F)
• Buffer fluid outlet: 1/2" NPT (F)
• Pressure gauge connection: 3/8" NPT (F)
• Filling connection: 1/2" NPT (F)
• Pressure gas connection: 1/2" NPT (F)
• Refilling connection: 1/4" NPT (F)
• Drain connection

• Capacity: 7.5 to 12.5 liters
• Design pressure: 10 bar (kg/cm2)
• Hydro test pressure: 15 bar (kg/cm2)
• Max working temperature: 180 C
• Heat transfer area of cooling coil: 0.226 m
• Recommended cooling water flow rate: 10 liters/min

Thermosyphon System

Material Of Construction

Accessories

Connection Specification

Operating Parameters